View Cart “QSR10” has been added to your cart.
AT1

AT 1

2 x 12” + 2 x 10” 3-way hornloaded high-performance line-array speaker
Features

  • Hornloaded 3-way line array system
  • 3 HF compression drivers with 1.75” voice coil
  • Compact design
  • 90° x 8° nominal coverage
  • Active fullrange operation
  • Ergonomic grip handles
  • Integrated flying system
Category:
  • Description
  • Reviews (0)

Product Description

The AT1 is a three-way high performance line array loudspeaker in a trapezoidal chassis for fixed installations and mobile use. The cabinet is equipped with three 1″ HF neodym drivers (1,75” voice coil). The HF drivers are mounted onto a horn with a nominal coverage of 90° x 8° (H x V). The MF section is equipped with two 10″ speakers (neodym), which are mounted behind the HF section. This 10” speakers are coupled with a phase plug and work onto a big horn. The LF section is equipped with two 12″ speakers (neodym), which work onto separate chambers. The AT1 can be flown in vertical colums with up to 16 units per side by using the AC1 flyframe. The angle between each AT1 can be adjusted from 0° up to 7° in steps of 1°. The AT1 is compatible with the AB1 and AB2 subwoofers. Up to four AT1 can be stacked onto AC1 flyframe (option). The chassis is constructed from 15 mm plywood (birch) and covered with black PolyUrea© finish. The cabinet is equipped with two grip handles and two front grills with transparent charcoal foam backing. Two speakon connectors (NL8) are mounted at the rear side of the chassis for signal input (input) and signal link (link). The power rating of the AT1 is 1.000 W (RMS) in the LF section, 800 W (RMS) in the MF section and 240 W (RMS) in the HF section. The impedance of the LF section is 16 ohms. The impedance of the MF section is 16 ohms. The impedance of the HF section is 24 ohms.

Reviews

There are no reviews yet.


Be the first to review “AT 1”

Accessories