EL 15

EL 15

15” 2-way hornloaded, coaxial line-array speaker
Features

  • 3 HF compression drivers (1.75” voice coil / PM4 technology)
  • Physical tuntime-correction (coaxial construction)
  • Hornloaded system for long throw effect
  • Phase-plug for more SPL (mid frequency range)
  • Very high SPL (136 dB SPL max. / 104 dB 1W/1m)
  • 100° x 8° nominal coverage
  • Passive fullrange operation
  • Integrated “QUICK LOCK” flyware
  • Durable NOVA PolyCoat© finish
Category:
  • Description
  • Reviews (0)

Product Description

The EL15 is a two-way high performance line array speaker in a trapezoidal chassis for fixed installations and mobile use. The cabinet is equipped with three 1″ HF drivers (1,75” voice coil), which are mounted onto a wave guide. The nominal coverage is 100° x 8° (H x V). The MF/LF section is equipped with one high-performance 15″ speaker (3” voice coil), which is hornloaded. The 15” transducer is contructed behind the wave guide of the high-frequency section (coaxial construction). The EL15 can be flown in vertical colums with up to 8 units per side by using the EC1 flyframe. The angle between each EL15 can be adjusted from 0° up to 7,5° in steps of 1,5°. The EL15 is compatible with all other ELITE models including ELITE subwoofers. Up to three EL15 can be directly stacked onto the E18SUB subwoofer without any adapter or additional frame. The chassis is constructed from 15 mm plywood (birch) and covered with black PolyCoat© finish. The cabinet is equipped with two grip handles and one front grill with transparent charcoal foam backing. Two speakon connectors (NL4) are mounted at the rear side of the chassis for signal input (input) and signal link (link). The power rating of the EL15 is 600 W (RMS), the impedance is 8 ohms.

Reviews

There are no reviews yet.


Be the first to review “EL 15”

Accessories

  • EC1

    EC 1

    out of 5

    Flybar for ELC 26, EL 10, EL 15, EH 10, EH 15, ELC 15 SUB, E 15 SUB, black steel

  • QRS10

    QSR10

    out of 5

    Professional Rack, 10 HU, 19″, Quickshut, Rack-in-Rack version

  • mdu1

    MDU1

    out of 5

    Mains Power Distributor, 5 x 16 AMP, 4 x 4-pol. Speakon Output, XLR Input Patchbay, 16 AMP Mains Input Connector (5-phase)

  • ACS2

    ACS2

    out of 5

    Set of 4 Stands / Feet for AC 1 / AC 2 / EC 1 Flybar, for ground-stacked use